Step 3 - Decking

Return To Menu

King Size
With a California King Size frame, position the three boards on the pedestal. Be sure the pedestal is equally recessed on all four sides so that the weight of the waterbed may be evenly distributed.

The cut corner(s) should be at the head of the bed so that the waterbed heater wires may pass under the frame and be plugged into an outlet. Do NOT install the heater at this point.
If your corners are not cut, trim off a triangular piece of the corner about 3" from the corner nearest the electrical wall outlet using a small handsaw or jigsaw.

Queen Size
The California Queen size typically has three boards of two sizes. Position the three boards on the pedestal with the narrower board in the middle. Be sure the pedestal is equally recessed on all four sides so that the weight of the waterbed may be evenly distributed.

The cut corners should be at the head of the bed so that the waterbed heater wires may pass under the frame and be plugged into an outlet. Do NOT install the heater at this point.

Super Single
The Super Single size typically has two boards. Position the boards on the pedestal with the narrower board in the middle. Be sure the pedestal is equally recessed on all four sides so that the weight of the waterbed may be evenly distributed.

The cut corners should be at the head of the bed so that the waterbed heater wires may pass under the frame and be plugged into an outlet. Do NOT install the heater at this point.

Return To Menu

<< Next >>

Contact Our Service Department
  Having trouble with your waterbed?
  Feel free to give the knowledgeable staff at our Service Department a call:

  (757) 838-5470

Locally owned & operated for over 26 years!